Log Cabin Cost Calculator

Estimate your log cabin cost in US dollars, then see what a cabin costs to build by size, scope, and region. Land is not included in any figure on this page, and every figure is a modeled estimate from Cost model v2, rates effective October 2026, not a contractor quote.

By Ethan Brooks, editor behind Super Log Cabins. Published: November 3, 2026. Updated: November 11, 2026.

Log Cabin Cost Calculator

Answer a few quick questions and get a realistic, itemized cost estimate for your cabin project — based on 2025–2026 US building costs.













Refine your estimate (optional)






DIY labor — what % of each trade will you do yourself?

Savings apply to the typical labor share of each trade. Only trades in your build type count.

0%
0%
0%
0%
0%
0%

Monthly payment estimate — optional

Estimated total range
–

Cost per sq ft
–

Compare build types — same inputs


Quick answer: what a log cabin costs to build in 2026

At the fixed baseline, 1,200 sq ft, pine, milled, crawl space, Southeast, rural, standard finish:

  • Kit only: $123,000, about $102 per sq ft, range $110,000 to $137,000
  • Dried-in shell: $180,000, about $150 per sq ft, range $162,000 to $201,000
  • Full turnkey: $376,000, about $313 per sq ft, range $338,000 to $421,000

Figures are rounded to the nearest $1,000 in this section. Exact engine totals are in the worked examples below.

Modeled with Cost model v2, rates effective October 2026, not a quote.

Jump to: What you are pricing · Cost per square foot · Cost by size · Worked examples · Where the money goes · What moves the price most · Doing some of the work yourself · Costs outside the build price · From estimate to bids · How these numbers are calculated · Frequently asked questions

What you are pricing: kit, dried-in shell or turnkey

Most of the confusion in published log cabin prices comes from scope. Three different prices can all be true for the same cabin, because they price different things.

Scope What it includes, in this calculator What it leaves out
Kit only Log package, delivery and crane, permits and fees at 1.5 percent Foundation, assembly, roofing, windows and doors, plumbing, electrical, HVAC, insulation, interiors, kitchen, bathrooms, design, staining, utilities, land, site work
Dried-in shell Log package, assembly labor, roofing, windows and exterior doors, permits and fees at 1.5 percent Foundation, delivery and crane, staining, plumbing, electrical, HVAC, interiors, kitchen, bathrooms, design, utilities, land, site work
Full turnkey Everything in the engine: log package, assembly, roofing, windows and doors, delivery, site preparation, foundation, plumbing, electrical, HVAC, insulation, partitions, flooring, kitchen, bathrooms, design and plans, staining, well and septic, power hookup, driveway, permits and fees at 1.5 percent, location factor, contingency Land, financing costs, taxes, insurance, maintenance, furniture, appliances beyond the standard kitchen allowance

Why the scopes do not nest: kit suppliers usually include delivery and crane in the kit price, while a dried-in shell as quoted by kit suppliers usually excludes delivery and freight, and foundation. That is why the dried-in total in this calculator excludes delivery and foundation, and why a kit price alone is not a finished cabin price.

That is why a kit price alone is not the total cost to have a finished cabin, and why a turnkey price looks high next to a kit price. Compare like with like, same size, same scope, same species and finish, or the comparison means nothing.

Log cabin cost per square foot

Per square foot falls as the cabin gets bigger for a full turnkey build, because fixed costs, kitchen, design, and rural utilities, are spread over more square feet. It does not fall the same way for kit only or dried-in, because almost every line in those scopes scales with size.

At the fixed baseline:

Scope Per sq ft at 600 sq ft Per sq ft at 1,200 sq ft Per sq ft at 2,000 sq ft Per sq ft at 3,000 sq ft
Kit only $106 $102 $101 $100
Dried-in shell $150 $150 $150 $150
Full turnkey $421 $313 $270 $249

Dried-in is $150 per sq ft at every size in this engine, because every dried-in line scales with size and delivery is excluded from that scope. That is a property of the model, not a market fact, and it should be read that way.

Do not call these figures “the average cost”. They are modeled estimates under the stated baseline. Published ranges from other sites differ because they use different scopes, different regions, and different years.

Log cabin cost by size

Fixed baseline, pine, milled, crawl space, Southeast, rural, standard finish, 9 ft walls, 2 bathrooms, 12 percent contingency, 0 percent DIY. Totals rounded to the nearest $1,000. Per sq ft is total divided by size, rounded to the nearest dollar.

Size Kit only total Kit only per sq ft Dried-in total Dried-in per sq ft Full turnkey total Full turnkey per sq ft
600 sq ft $63,000 $106 $90,000 $150 $253,000 $421
800 sq ft $83,000 $104 $120,000 $150 $294,000 $367
1,000 sq ft $103,000 $103 $150,000 $150 $335,000 $335
1,200 sq ft $123,000 $102 $180,000 $150 $376,000 $313
1,500 sq ft $152,000 $102 $225,000 $150 $438,000 $292
2,000 sq ft $202,000 $101 $300,000 $150 $540,000 $270
2,500 sq ft $251,000 $100 $375,000 $150 $643,000 $257
3,000 sq ft $301,000 $100 $450,000 $150 $746,000 $249

What a given budget buys, at the same baseline, full turnkey: about $250,000 buys a cabin just under 600 sq ft, about $335,000 buys 1,000 sq ft, about $376,000 buys 1,200 sq ft, about $540,000 buys 2,000 sq ft. Those are modeled totals, before land, financing, taxes, and insurance.

Worked examples

Three scenarios, with stated inputs and line items. The first is the existing 1,200 sq ft default example, kept so figures match the tool.

Example 1: 1,200 sq ft, full turnkey, pine, milled, the default

Inputs: 1,200 sq ft, full turnkey, pine, milled, crawl space, Southeast, rural, standard finish, 9 ft walls, 2 bathrooms, 12 percent contingency, 0 percent DIY, no porch, no garage, no fireplace, no solar.

Line item Amount
Log package, pine milled $99,900
Assembly labor $29,970
Roofing $10,800
Windows and exterior doors $14,400
Delivery and crane $5,900
Site preparation and clearing $6,400
Foundation, crawl space $13,800
Plumbing $7,200
Electrical $6,000
HVAC $9,600
Insulation $4,800
Interior partitions $2,400
Flooring, standard $14,400
Kitchen, standard finishes $22,000
Bathrooms, 2 $18,000
Design and plans $12,000
Staining and sealing, initial $3,600
Well, septic, sewer hookup $24,000
Power hookup $9,000
Driveway, access road $10,000
Line items subtotal $324,170
Permits and fees, 1.5 percent $4,863
Subtotal with permits $329,033
Location factor, Southeast x rural, 1.02 $335,613
Contingency, 12 percent $40,274
Total $375,887
Range, low to high $338,298 to $420,993
Per sq ft $313

Example 2: 1,000 sq ft, kit only, pine, milled

Inputs: 1,000 sq ft, kit only, pine, milled, 9 ft walls, Southeast, rural, 12 percent contingency, 0 percent DIY. Foundation, finish, and bathrooms do not apply to kit only in this engine.

Line item Amount
Log package, pine milled $83,250
Delivery and crane $5,500
Line items subtotal $88,750
Permits and fees, 1.5 percent $1,331
Subtotal with permits $90,081
Location factor, 1.02 $91,883
Contingency, 12 percent $11,026
Total $102,909
Range, low to high $92,618 to $115,258
Per sq ft $103

This is the kit price only. Foundation, assembly, roofing, windows, plumbing, electrical, HVAC, interiors, kitchen, bathrooms, design, utilities, land, and site work are not in this total.

Example 3: 2,000 sq ft, full turnkey, pine, milled

Inputs: 2,000 sq ft, full turnkey, pine, milled, crawl space, Southeast, rural, standard finish, 9 ft walls, 2 bathrooms, 12 percent contingency, 0 percent DIY, no porch, no garage, no fireplace, no solar.

Line item Amount
Log package, pine milled $166,500
Assembly labor $49,950
Roofing $18,000
Windows and exterior doors $24,000
Delivery and crane $7,500
Site preparation and clearing $8,000
Foundation, crawl space $17,000
Plumbing $12,000
Electrical $10,000
HVAC $16,000
Insulation $8,000
Interior partitions $4,000
Flooring, standard $24,000
Kitchen, standard finishes $22,000
Bathrooms, 2 $18,000
Design and plans $12,000
Staining and sealing, initial $6,000
Well, septic, sewer hookup $24,000
Power hookup $9,000
Driveway, access road $10,000
Line items subtotal $465,950
Permits and fees, 1.5 percent $6,989
Subtotal with permits $472,939
Location factor, 1.02 $482,398
Contingency, 12 percent $57,888
Total $540,286
Range, low to high $486,257 to $605,120
Per sq ft $270

Where the money goes

Shares below are for Example 1, the 1,200 sq ft full turnkey baseline, as a share of line items before permits, location, and contingency, $324,170. Permits, location, and contingency add $51,717 on top of that subtotal, taking the total to $375,887.

Group Amount Share of line items
Log package $99,900 31 percent
Assembly labor $29,970 9 percent
Roofing, windows and doors $25,200 8 percent
Delivery, site preparation, foundation $26,100 8 percent
Plumbing, electrical, HVAC $22,800 7 percent
Interiors and finishes, insulation, partitions, flooring, kitchen, bathrooms, staining $65,200 20 percent
Design and plans $12,000 4 percent
Utilities, well and septic, power, driveway $43,000 13 percent
Line items total $324,170 100 percent

The single largest line is the log package, about 31 percent. Utilities are the next surprise for many readers, $43,000 at a rural site, because a rural well, septic, power hookup, and driveway are priced as separate lines in this engine, where the published ranges above exclude them or price them for a suburban lot.

What moves the price most

Starting from the 1,200 sq ft full turnkey baseline, $375,887, changing one thing at a time. Amounts rounded to the nearest $1,000, percent change from the baseline.

Change, one at a time New total Change Percent
Cedar instead of pine, milled $466,000 +$90,000 +24 percent
Handcrafted instead of milled, pine $466,000 +$90,000 +24 percent
Cypress instead of pine (placeholder, get a builder quote) $422,000 +$46,000 +12 percent
Spruce instead of pine $402,000 +$26,000 +7 percent
Oak instead of pine $390,000 +$14,000 +4 percent
Full basement instead of crawl space $397,000 +$21,000 +6 percent
Slab instead of crawl space $375,000 -$1,000 0 percent
Northeast instead of Southeast $432,000 +$56,000 +15 percent
Pacific Northwest instead of Southeast $421,000 +$45,000 +12 percent
Mountain West instead of Southeast $406,000 +$30,000 +8 percent
Southwest instead of Southeast $395,000 +$19,000 +5 percent
Midwest instead of Southeast $387,000 +$11,000 +3 percent
Remote site instead of rural $456,000 +$80,000 +21 percent
City site instead of rural $354,000 -$22,000 -6 percent
Suburban site instead of rural $339,000 -$37,000 -10 percent
Premium finish instead of standard $407,000 +$32,000 +8 percent
Basic finish instead of standard $362,000 -$14,000 -4 percent
10 ft walls instead of 9 ft $391,000 +$15,000 +4 percent
12 ft walls instead of 9 ft $421,000 +$45,000 +12 percent
200 sq ft porch added $389,000 +$13,000 +3 percent
400 sq ft garage added $399,000 +$23,000 +6 percent
Masonry fireplace added $405,000 +$29,000 +8 percent
Prefab fireplace added $385,000 +$9,000 +2 percent
Solar panels added, 4.8 kW $391,000 +$15,000 +4 percent
3 bathrooms instead of 2 $386,000 +$10,000 +3 percent
1 bathroom instead of 2 $365,000 -$10,000 -3 percent

Notes on this table, read before using it. Cedar and handcrafted show the same dollar change, because in this engine cedar at $120 per sq ft is 60 percent above pine at $75 per sq ft, and handcrafted at 1.6 times is also 60 percent above milled, and both act only on the log package. That is a property of the model, not a market coincidence. Region multipliers in this engine are directional and dampened, and the model spec marks them unverified, because no log-home-specific regional table exists, only general residential data. Site is the bigger lever than region in this table: remote adds $80,000, suburban saves $37,000, mostly through utilities and the site multiplier. Slab saves only about $1,000 against crawl space at this size, because the foundation line is small next to the log package and utilities.

Doing some of the work yourself

DIY savings in this engine are labor savings only, calculated as DIY percent times a typical labor share times the trade cost, for each trade. Labor shares used: foundation 40 percent, assembly 100 percent, roofing 50 percent, plumbing 45 percent, electrical 45 percent, interiors 40 percent. Those shares are estimates, labeled in the tool, not surveyed rates. Savings reduce the subtotal before permits, location, and contingency, so the saving shown is the saving on the total, not on the trade line alone.

Full turnkey, 1,200 sq ft baseline, pro-built total $375,887:

DIY level, all trades Total You save, against pro-built
25 percent of each trade $355,000 $21,000
50 percent of each trade $334,000 $42,000
100 percent of each trade $291,000 $85,000

By trade, at 100 percent DIY, full turnkey, 1,200 sq ft:

Trade, 100 percent DIY You save
Log assembly and stacking $35,000
Interior finishes $30,000
Foundation $6,000
Roofing $6,000
Plumbing $4,000
Electrical $3,000

Dried-in shell, 1,200 sq ft, pro-built total $179,809: 50 percent DIY on assembly and roofing saves $21,000, total $159,000. 100 percent DIY saves $41,000, total $139,000. Kit only has no labor rows in this engine, so DIY saves nothing on a kit-only total in the calculator, which is correct for that scope, the kit price is materials and delivery.

What DIY does not save: materials, delivery, permits, design, utilities, or the cost of tools, time, rework, or a loan and insurance problem if work is not done to code. Assembly and interior finishes are the two trades where DIY moves the total most, and they are also the two where skill and time matter most. Do not present DIY as free money.

Costs outside the build price

The calculator total does not include land, and it does not include financing costs, taxes, insurance, or maintenance after you move in. Those are real costs, and they are not in the engine, so this guide gives no invented figures for them.

  • Land and clearing: land price, clearing, and access beyond the driveway line in the calculator are not modeled. Site preparation in the calculator is $4,000 plus $2 per sq ft, which is clearing and grading for the building pad, not buying land.
  • Design and plans: $12,000 is included in the full turnkey total, as a line item. It is not included in kit only or dried-in.
  • Financing: the calculator shows a monthly payment estimate, principal and interest only, on the total minus your down payment. It does not include taxes, insurance, or mortgage insurance. Illustrative monthly payments, 20 percent down, 30 years, principal and interest only: $200,000 total, $1,011 a month at 6.5 percent, $1,119 at 7.5 percent. $375,887 total, $1,901 a month at 6.5 percent, $2,103 at 7.5 percent. $500,000 total, $2,528 a month at 6.5 percent, $2,797 at 7.5 percent. These are illustrations from the engine’s mortgage formula, not a loan offer, and rates change.
  • Taxes, insurance, and maintenance: no figure is given here, because no source was checked for this guide. No single figure is given here, because taxes, insurance, and maintenance vary too much by location and policy. Staining and sealing is in the turnkey total only as an initial $3 per sq ft line, not as ongoing maintenance.
  • The three mistakes that change the answer most are pricing a kit as if it were turnkey, forgetting rural utilities, and forgetting land, financing, taxes, and insurance. Use the estimate correctly: run the calculator with your own size, species, region, and site, compare scopes like with like, and get builder quotes for the final number.

How this compares with published ranges

HomeGuide, updated January 5, 2026, puts building a log cabin at $100 to $300 per square foot, with a kit at $50 to $100 per square foot and a turnkey log home kit at $125 to $275 per square foot. Angi, updated October 29, 2026, puts a cabin at $125 to $175 per square foot, with most homeowners spending $50,000 to $150,000. This page's turnkey figure, $313 per square foot at 1,200 square feet, sits above both ranges, because it includes $43,000 of rural utilities, well and septic, power hookup, and driveway, plus a full kitchen, two bathrooms, design, and contingency, on a rural site. The suburban equivalent on the same inputs is $339,000, $283 per square foot, inside HomeGuide's range. Compare scope first, then price.

From estimate to bids

Use the calculator total as a planning estimate, then get quotes you can compare. A quote you can compare must state, in writing: scope, kit only, dried-in, or turnkey, and exactly what is included and left out; size, species, style, foundation, finish, and wall height; site and region; utilities included or excluded; permits included or excluded; contingency, if any; and a date, because prices move. If two quotes use different scopes, they are not comparable, even if the totals look close. Ask each builder to price the same scope, on the same inputs, and to list exclusions in the same place.

 

How these numbers are calculated

Changelog: Cost model v2, rates effective October 2026. Guide added November 11, 2026. No rate changes since then.

Rate Value
Kit rates per sq ft, milled pine $75, spruce $88, oak $82, cypress $98, cedar $120
Style multiplier milled 1.0, handcrafted 1.6
Wall height plus 11 percent per foot over 8 ft on the log package only
Assembly labor 30 percent of the log package
Roofing $9 per sq ft
Windows and doors $12 per sq ft
Plumbing $6 per sq ft
Electrical $5 per sq ft
HVAC $8 per sq ft
Insulation $4 per sq ft
Partitions $2 per sq ft
Flooring basic $8, standard $12, premium $18 per sq ft
Kitchen basic $15,000, standard $22,000, premium $42,000
Bathrooms $9,000 each
Design and plans $12,000
Staining and sealing, initial $3 per sq ft
Foundation slab $8,000 plus $4 per sq ft, crawl space $9,000 plus $4 per sq ft, full basement $22,000 plus $8 per sq ft
Delivery $3,500 plus $2 per sq ft
Site preparation $4,000 plus $2 per sq ft
Permits and fees 1.5 percent of subtotal
Contingency 12 percent, adjustable

Oak at $82 is cheaper than spruce at $88 in this model because the research behind it puts oak close to pine, while spruce is 15 to 20 percent above pine. Cypress at $98 is a placeholder within a researcher's suggested 25 to 40 percent range, so get a builder quote for cypress.

Model: Cost model v2, grounded in October 2026 US cost research. Figures use 2025–2026 US cost data. Rates effective October 2026. Utilities by site: well and septic, city $3,500, suburban $8,000, rural $24,000, remote $30,000; power hookup, city $1,500, suburban $4,000, rural $9,000, remote $14,000; driveway, city $2,000, suburban $5,000, rural $10,000, remote $15,000. Porch $55 per sq ft, garage $50 per sq ft. Fireplace: prefab $8,000 installed, masonry $25,000. Solar: 4 watts per sq ft at $2.65 per watt, before incentives, the 30 percent federal residential credit expired for systems placed in service after December 31, 2025. Location factor is region times site, region Southeast 1.00, Midwest 1.03, Southwest 1.05, Mountain West 1.08, Pacific Northwest 1.12, Northeast 1.15, site city 1.08, suburban 1.00, rural 1.02, remote 1.18. Range is total x 0.90 low, total x 1.12 high.

Limitations, stated plainly: these are modeled estimates under stated assumptions, not surveyed averages, and not a quote. Region multipliers are directional and dampened, and the model spec marks them unverified, because no log-home-specific regional table exists. Cypress at $98 per sq ft is a placeholder within a researcher’s suggested 25 to 40 percent range, get a builder quote for cypress. Solar sizing at 4 watts per sq ft is an estimate, real sizing depends on electricity use and sun hours. DIY labor shares are estimates. Update schedule: these figures are reviewed twice a year, and the updated date changes only when the figures change.

About the author: Ethan Brooks, editor behind Super Log Cabins. He researches log cabin kits, costs, and building rules, and turns what he finds into plain, practical guides. He brings experience in engineering design and floor plans, including CAD design and planning. These figures are modeled estimates, not hands-on building experience.

 

 

Sources: the calculator engine itself, Cost model v2, and the research in the model spec, re-verified 2026-10-13. External sources for rates were checked in that research pass, in October 2026, and are linked below. Rates in this calculator were checked against published ranges from HomeGuide and Angi, and against the research in the model spec, re-verified October 13, 2026.

Frequently asked questions

How much does a log cabin cost to build?

At the fixed baseline, 1,200 sq ft, pine, milled, crawl space, Southeast, rural, standard finish, full turnkey is $376,000, about $313 per sq ft, range $338,000 to $421,000. Kit only is $123,000, dried-in is $180,000, same size and baseline. Run the calculator with your own size, species, region, and site for your number.

What does kit only include?

Log package, delivery and crane, and permits and fees at 1.5 percent. It does not include foundation, assembly, roofing, windows, plumbing, electrical, HVAC, interiors, kitchen, bathrooms, design, utilities, land, or site work.

Why does cost per sq ft fall as the cabin gets bigger?

For full turnkey, fixed costs, kitchen, design, and rural utilities, are spread over more square feet. At 600 sq ft turnkey is $421 per sq ft, at 3,000 sq ft it is $249 per sq ft, same baseline otherwise.

Does the price include land?

No. Land is excluded from every figure on this page.

How accurate is this estimate?

It is a modeled estimate, range total x 0.90 to total x 1.12, under stated assumptions. Get builder quotes for a final number, and compare quotes on the same scope.

How much can DIY save?

On a 1,200 sq ft full turnkey baseline, $375,887 pro-built, 50 percent DIY on every trade saves about $42,000, total $334,000. 100 percent DIY saves about $85,000, total $291,000. Those are labor savings only, using typical labor shares, not surveyed rates.

How often are these figures updated?

Rates are effective October 2026, Cost model v2. These figures are reviewed twice a year, and the updated date changes only when the figures change.

Related guides

Read Log Cabin Kits 101 before you choose between a kit and a custom build, and Heating and Cooling Systems for a Log Cabin before you finalize HVAC. For the build itself, see Building a Log Cabin and Don’t Ignore Local Building Codes, and for hiring help, Tips for Hiring the Best Log Home Builder.